SAE AMS 5639J:2017 pdf free

SAE AMS 5639J:2017 pdf free.Steel, Corrosion-Resistant, Bars, Wire, Forgings, Mechanical Tubing, and Rings
This specification covers a corrosion-resistant steel in the form of bars, wire, forgings, mechanical tubing, flash welded rings,and stock for forging or flash welded rings.
These products have been used typically for parts requiring corrosion and heat resistance up to 800 9F (427 9C), but usage is not limited to such applications. Welding, brazing, or other exposure to temperatures over 800 9F (427 °C) during fabrication may impair corrosion resistance.
The issue of the following documents in effect on the date of the purchase order forms a part of this specification to the extent specified herein. The supplier may work to a subsequent revision of a document unless a specific document issue is specified. When the referenced document has been cancelled and no superseding document has been specified, the last published issue of that document shall apply.
AlI hexagons, regardless of size, other bars 2.75 inches (69.8 mm) and under in nominal diameter or least distance between parallel sides, and wire shall be cold finished.
Bars, other than hexagons, over 2.75 inches (69.8 mm) in nominal diameter or least distance between parallel sides shall be cold finished or hot finished and descaled.
The product, as received by purchaser, shall be uniform in quality and condition, sound, and free from foreign materials and from imperfections detrimental to usage of the product.
Grain flow of die forgings, except in areas which contain flash-line end grain, shall follow the general contour of the forgings showing no evidence of reentrant grain flow.
The producer of the product shall supply all samples for producer’s tests and shall be responsible for the performance of all required tests. Purchaser reserves the right to sample and to perform any confirmatory testing deemed necessary to ensure that the product conforms to specified requirements.SAE AMS 5639J pdf free download.