SAE AMS 4279B:2017 pdf free
SAE AMS 4279B:2017 pdf free.Aluminum Alloy, Alclad Sheet 4.4Cu- 1.5Mg – 0.60Mn (2024-T4 Flat Sheet)
Specimens nominally 0.750 inch (19.06 mm) in width, shall withstand without cracking when examined using at least 10X magnification, bending in accordance with ASTM E290 through a minimum angle of 180 degrees around a diameter equal to the bend factor shown in Table 4 times the nominal thickness of the product, with axis of bend parallel to the direction of rolling.
The vendor of the sheet shall supply all samples for vendor’s tests and shall be responsible for the performance of all required tests. Purchaser reserves the right to sample and to perform any confirmatory testing deemed necessary to ensure that the sheet conforms to specified requirements.
The vendor of sheet shall furnish with each shipment a report stating that the sheet conforms to the composition and tolerances and showing the numerical results of tests on each inspection lot to determine conformance to the other acceptance test requirements. This report shall include the purchase order number, inspection lot number, AMS 4279B, size, and quantity. The report shall also include the producer, the product form, and the size of the mill product.
A change bar (l) located in the left margin is for the convenience of the user in locating areas where technical revisions, not editorial changes, have been made to the previous issue of a specification. An (R) symbol to the left of the document title indicates a complete revision of the specification, including technical revision. Change bars and (R) are not used in original publications, nor in specifications that contain editorial changes only.
Dimensions and properties in inch/pound units and the Fahrenheit temperatures are primary; dimensions and properties in SI units and the Celsius temperatures are shown as the approximate equivalents of the primary units and are presented only for information.SAE AMS 4279B pdf free download.
