SAE J1360:2019 pdf free
SAE J1360:2019 pdf free.Product Identification Numbering System of Off-Road Work Machines
The label shall identify the name of the manufacturer (or in the case of imported products, the importer’s name may be shown) and shall include the manufacturer’s name, city, and state, including zip code. If desired, the manufacturer’s logo may also be included. If the manufacturer’s or importer’s name does not appear in the telephone or city directory of the city indicated, the street address shall also be shown.
A symbol shall immediately precede the first numeral or letter and immediately follow the last numeral or letter of the PIN or serial number shown on labels or stamped on the component, or placed on the machine in a concealed location. The selection of the specific symbol is at the discretion of the manufacturer but shall not be any character that may be confused with an Arabic numeral or Roman letter. The symbol may be an asterisk (*)， a company logo, or other configuration.
Symbols are designed to provide protection against the likelihood of characters being added to the PIN or serial number. If the same objective is achieved by providing an appropriate site or plate design on which the PIN is affixed, symbols are not required.
In addition, manufacturers shall indelibly etch or imprint the PIN or a Product ldentification Number Derivative in a concealed location on a permanent structure of the machine which is not normally considered a replaceable or substitutable item. The Concealed Product Identification Number shall be impressed to a minimum depth of 0.2 mm. The characters used in the Concealed Product ldentification Number shall have a minimum height of 6.0 mm and all characters must be legible. Protection against adding characters to the Concealed Product Identification Number shall be taken. (See Section 11 – Protection Against Adding Characters.)SAE J1360 pdf free download.
