SAE J1260:2019 pdf free
SAE J1260:2019 pdf free.Standard Oil Filter Test Oil
A panel judgment of flter performance, which deviates measurably from previously qualifed batches of oil, would constitute grounds for rejection.
Approved (June 1993) Filter Test Oil, RFO-3-93, is available by contacting Rock Valley Oil, 1911 Windsor Road,Rockford, IL 61111, Tel: 815-654-2400, Fax: 815-654-2428.
It is essential that the RFO-3-93 test fluid has uniform composition when used in testing oil filters to SAE HS 806, or any other original equipment manufacturer test procedures.
The RFO-3-93 test fluid as manufactured, if stored indoors, protected from the elements at temperatures of 10 to 30 °C,does not require special handling or mixing for a period of 2 months. Based on tests conducted by the producer of this test fluid, separation or stratification of some additives becomes appreciable, after storage in a quiescent state for three or more months, or when the test fluid is subjected to – -10。C or lower temperatures.
Before removing the RFO-3-93 test fluid from the drum, it is suggested the drum be brought into room temperature environment for at least 48 h. The contents are then mixed by using a drum mixer or a drum pump, by pumping from one bung into the other, for 10 to 15 min. This procedure assures uniformity of composition of the RFO-3-93 for use in a test stand. Water contaminated RFO-3-93 test fluid, containing more than 0.05% water, is considered unsuitable for use in a test stand for the calibration of filters.
Use a dedicated and clean drum pump, twice flushed with RFO-3-93 test fluid. Protect the test fluid from contamination by keeping the drum bungs closed when the drum is not in use.
The change bar (l) located in the left margin is for the convenience of the user in locating areas where technical revisions have been made to the previous issue of the report. An (R) symbol to the left of the document title indicates a complete revision of the report.SAE J1260 pdf free download.
