SAE AMS 6953:2018 pdf free
SAE AMS 6953:2018 pdf free.Titanium Alloy Sheet 6Al- 4Sn – 3Nb – 0.5Mo – 0.3Si,Duplex Annealed
The producer shall furnish with each shipment a report showing the producer identity, country where the metal was melted (i.e, final melt in the case of metal processed by multiple melting operations), the results of tests for composition of each heat and for hydrogen content, tensile properties, bending, and surface contamination of each lot, ultrasonic inspection when required, and stating that the product conforms to the other technical requirements.
This report shall include the purchase order number, heat and lot numbers, AMS6953 product form, size, and quantity.
Mechanical property requirements for product outside the range covered by 1.1 shall be agreed upon between purchaser and producer.
When material produced to this specification is beyond the sizes allowed in the scope or tables, or other exceptions are taken to the technical requirements listed in Section 3, (see 5.1) the report shall contain a statement “This material is certified as AMS6953(EXC) because of the following exceptions:” and the specific exceptions shall be listed.
A change bar (I) located in the left margin is for the convenience of the user in locating areas where technical revisions, not editorial changes, have been made to the previous issue of this document. An (R) symbol to the left of the document title indicates a complete revision of the document, including technical revisions. Change bars and (R) are not used in original publications, nor in documents that contain editorial changes only.
An excess of material in a localized area of a sheet that causes the sheet to buckle in that area. When the sheet is placed on a flat surface and hand pressure applied to the buckle, the buckle will spring through to the opposite surface or spring up in another area of the sheet.SAE AMS 6953 pdf free download.
